Before Use; Voltage Selector - Taurus EASY TRIP VER III Gebrauchsanleitung

Downloaded by: pd-oliana on 31-03-2023 13:37 CEST
EN
(Original instructions)
TRAVEL IRON
EASYTRIP (VER.III)
DESCRIPTION
A Steam burst button
B Water fill cover
C Ceramic soleplate
D Pilot light
E Dual Voltage selector
F Steam regulator
G Temperature regulator
H Foldable handle button
I Cup
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Fully extend the appliance's power cable
before each use.
Do not use the device if the accessories
are defective. Proceed to replace them
immediately.
Use the appliance handle/s, to catch it or move
it.
To keep the non-stick treatment in good
condition, do not use metal or pointed utensils
on it.
Respect the MAX level indicator.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
This appliance is for household use only, not
professional, industrial use.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Do not store or transport the appliance if it is
still hot.
Keeping the iron in its housing support at
maximum temperature for too long time, may
cause its color change, which will not affect the
correct working order of the appliance.
For a correct operation, keep the soleplate in
proper conditions does not operate over metal
objects (ironing board metal parts, buttons,
zips etc.).
It is advisable to use distilled water, especially
if the water in your area contains clay or if it is
"hard" (containing lime or magnesium).
Check that the lid is closed properly before
starting the appliance.
Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance.
Never rest the appliance into a surface while
in use.
Do not use the appliance on any part of the
body of a person or animal.
Do not use the appliance with pets or animals.
Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
Before using the iron for the first time, remove
the plastic protector from the base (if it has
one) clean the base with soft cloth.
INSTRUCTIONS FOR USE

BEFORE USE:

Remove the appliance's protective film.
Make sure that all products' packaging has
been removed.
Ensure that the selected tension on the voltage
selector coincides with the tension of the
mains.
To eliminate the smell given off by the
appliance when used for the first time, it is
recommended to have it on at full power for 2
hours in a well-ventilated room.
Prepare the appliance according to the function
you wish to use.

VOLTAGE SELECTOR:

The appliance has a voltage selector control,
situate the selector according to the type
of voltage available in the mains where the
appliance is to be connected.