Safety Instructions; Applicable Documents; Delivery And Transport - OEG SecuFresh 22 Montage- Und Bedienungsanleitung

SecuFresh 22 and SecuFresh 29 fresh water stations are exclusively used for heating
drinking water using a buffer storage tank and the station's internal plate heat
exchanger with flow-through principle.
Only drinking water in accordance with the Drinking Water Ordinance is allowed
to be heated.
In addition to country-specific guidelines and local directives, the following technical
regulations must also be taken into account:
• DIN 1988 Technical rules for drinking water installations
• DIN 18 380 Heating systems and central water heating systems
• DIN 18 381 Gas, water and wastewater installation works
• DIN 18 421 Thermal insulation work on thermal engineering systems
• VDI 2035 Avoidance of damage in hot water heating systems
• DIN 4753 Water heaters and water heating installations for drinking water and
service water
• DIN 4708 Central water heating system
• VDE 0100 Installation of electrical equipment
• VDE 0190 Main equipotential bonding of electrical systems.
• TrinkwV Drinking Water Ordinance
• DVGW W551 Drinking water heating and drinking water pipeline systems
• BGV Accident prevention regulations of workers' compensation associations
As the system can reach temperatures of >60 °C, there is a risk of scalding
and burning through contact with the components.
Also observe the installation and operating instructions for the components used.
Check to make sure the product is complete and undamaged immediately after reception.
Any damage or complaints must be reported immediately.
SecuFresh 22 and SecuFresh 29 Frischwasserstation
17
Intended purpose 1.1

Safety instructions

1.2

Applicable documents

1.3

Delivery and transport

1.4
GB