Maintenance Intervals; Cleaning; Storage - Kress KC100 Serie Bedienungsanleitung

Gadus S2 V220 1) into the gear housing.
3. Refit and tighten the screw firmly.
4. Install the battery and run the trimmer for 1
minute to ensure the gear is evenly lubricated.
K1
K2
Cleaning the air filter (See Fig. L1, L2)
1. Clean the area around the air filter. Use a damp
cloth or a soft brush.
2. Unscrew and remove the air filter.
3. Wash the air filter with running water to remove
the dirt.
4. Allow the air filter to dry in the air. And then install
it in the housing by thghtening the screw.
L1
L2

Maintenance intervals

It is recommended to lubricate the gearbox and
clean the air filter every 50 hours of operation based
on actual usage.

CLEANING

1. Switch off the trimmer and remove the battery.
2. Do not use aggressive detergents or solvents.
Clean the machine after use with a damp cloth
dipped in mild detergent.
3. Keep battery connection free of dirt and debris,
and clean with a soft and dry brush or cloth.
4. Do not spray water onto the motor and electrical
components.
5. Do not use pressure washer to clean your
machine.

STORAGE

1. Remove the battery pack from the trimmer before
storage.
2. Once got wet in the rain during operation, the
machine and the battery should be dried before
storing or charging. Remove the battery and
reinsert it if the machine fails to turn on.
3. Store the trimmer and the battery in a dry and
secure place that is inaccessible to children and
other unauthorized people.
Remove the cutting attachment if it will not be
used for a long time.
4. Store the battery only within a temperature range
between 5 C (41 F) and 25
o o
example, do not leave the battery in the car in
summer time.
C (77 F). As an
o o
13
EN