Bosch PSR 7,2 LI Originalbetriebsanleitung Seite 37

OBJ_BUCH-781-003.book Page 37 Wednesday, February 2, 2011 3:26 PM
Battery Charging (see figure A)
Do not use other battery chargers. The supplied bat-
tery charger is designed for the Lithium-Ion battery in
your machine.
Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the
nameplate of the battery charger. Battery chargers
marked with 230 V can also be operated with 220 V.
Note: The battery is supplied partially charged. To ensure
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for
the first time.
The lithium-ion battery can be charged at any time with-
out reducing its service life. Interrupting the charging pro-
cedure does not damage the battery.
The lithium-ion battery is protected against deep dis-
charging by the "Electronic Cell Protection (ECP)". When
the battery is empty, the machine is switched off by
means of a protective circuit: The inserted tool no longer
rotates.
Do not continue to press the On/Off
WARNING
switch after the machine has been auto-
matically switched off. The battery can be damaged.
The charging procedure starts as soon as the main plug of
the battery charger is inserted into the socket and the
cordless screwdriver is afterwards placed on the battery
charger 11.
Bosch Power Tools
English | 37
2 609 005 113 | (2.2.11)