Bosch PSR 7,2 LI Originalbetriebsanleitung Seite 31

OBJ_BUCH-781-003.book Page 31 Wednesday, February 2, 2011 3:26 PM
Safety Warnings for Screwdriver
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the pow-
er tool "live" and could give the operator an electric
shock.
Hold the machine with a firm grip. High reaction
torque can briefly occur while driving in and loosening
screws.
Always wait until the machine has come to a com-
plete stop before placing it down. The tool insert can
jam and lead to loss of control over the power tool.
Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and
storage, set the rotational direction switch to the
centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
Protect the power tool against heat, e. g.,
against continuous intense sunlight, fire, wa-
ter, and moisture. Danger of explosion.
In case of damage and improper use of the battery,
vapours may be emitted. Provide for fresh air and
seek medical help in case of complaints. The vapours
can irritate the respiratory system.
Safety Warnings for battery chargers
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
Bosch Power Tools
English | 31
2 609 005 113 | (2.2.11)