Technical Specifications - Hudora Playoff 205 Aufbau- Und Gebrauchsanleitung

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private / domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Basketball stand Playoff 205
Item number: 71756
Height-adjustable: 157 – 205 cm
Purpose: Portable training rack for basketball throwing exercises.
If you have assembly problems or would like further information on the product, we
have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Basketball stand (see parts list on pages 2 to 4) | 1 x These instructions
Other parts which may be included with the delivery in some circumstances are not
required.
GENERAL TRAINING PRINCIPLES
1. Warm up:
Warm up before each training session. Walking or running on the spot and light
stretching exercises are excellent for warming up.
2. Breathing:
Correct breathing plays an important role in training. Breathe calmly and evenly.
Never hold your breath while training.
3. Clothes and space:
Wear comfortable sports clothing when training. Always wear sports shoes; never
train in bare feet, sandals, socks or tights.
4. Warm down:
Use light stretching to warm down again after training. This allows the pulse to drop
slowly and allows the body to regenerate itself more quickly for the next session, as
the decomposition of metabolic wastes (lactates) is better achieved through carrying
out these movements at the end.
5. Health:
Stop the exercise program immediately if you feel a tightening in your muscles or any
general pain when carrying out the exercises. For your own safety, please contact a
doctor.
USE: Make sure this piece of equipment is positioned securely and firmly. Adjust the
length of time you train to your capacities and do not over-exert yourself.
WARNING: As a matter of course, you should consult your doctor before starting the
training.
SAFETY INSTRUCTIONS
• This training equipment is NOT a toy! Use the basketball stand for its intended
purpose only.
• This piece of training equipment is only suitable for private use. If it is used
commercially, any guarantee is invalidated.
• Warnings! The stand must be properly secured at all times to prevent toppling.
• Place the basketball stand on a firm and level surface and make sure this piece of
equipment is positioned securely and firmly.
• Always fill the inner sandbags with sand and place them in the large outer sandbag
to stabilise the basketball stand and prevent it from falling forward.
• Check that all connections have been tightly fastened before using the basketball
stand and check again later!
• Before each use, check that the basketball stand is set up correctly and never use
it if it is not working properly.
• Check the basketball stand regularly for defective parts and replace them. Use
original spare parts only.
• Do not climb up the basketball stand.
• Do not hang off the basket or make slam dunks, the basketball stand could tip over.
• Never allow children to play in the immediate proximity of this piece of training
equipment without supervision and never let them assemble it.
• Never use the basketball stand near water or leave it outside in the rain.
• Wear suitable clothing when training. The clothes must be constituted in such a
way that they cannot catch in anything during the training due to their fit.
• Always wear training shoes, and never train in bare feet, or when wearing sandals,
socks or stockings.
• Never wear jewellery which could catch in the basketball basket.
• If you start to feel unwell, discontinue training immediately.
• When permanently irradiated with UV light, the material ages significantly faster.
To avoid premature aging and thereby extend the service life, you should always
store the product in a dry and dark place when not in use. Do not permanently
expose the product to wind, moisture, extreme temperatures or sunlight.
All images are examples of the design.
INSTRUCTIONS ON ASSEMBLY
Step 1: Assemble the floor frame using parts (1), (2), (3), (4) and (5) (fig. 1). Make
sure that the middle connecting rod (5) is only assembled with the cross struts (7)
in the next step (fig. 2).
Step 2: Connect the floor frame to the lower vertical bar (8) using the cross struts
(7) (fig. 2).
Step 3: Attach the outer sandbag (22) to the floor frame. Make sure to guide the two
U-tubes (6) through the side tabs of the sandbag (22). The top of the sandbag (22)
should cover the U-tubes when attached (fig. 3).
Step 4: Screw the feet (17) to the underside of the floor frame. You can compensate
for any unevenness in the floor by screwing in the feet to different depths (fig. 4).
Step 5: Assemble the middle and upper vertical rods (9) and (10). The middle
vertical rod (9) is only attached to the lower vertical rod (8) and can be removed
later without tools (fig. 5).
Step 6: Attach the net (13) to the basket ring (12) as shown in fig. 6 and connect the
basket ring (12), board (11) and the upper vertical bar (10) together. They must be
connected at the same time using the screw set (18) (fig. 7).
Step 7: Fill the two inner sandbags (23) with sand. The sand bags (23) should be
filled completely to provide sufficient counterweight and to prevent the stand from
falling over (fig. 8).
Step 8: Place the two filled inner sandbags (23) in the outer sandbag (22) and close
the lid using the hook-and-loop fasteners on the sides and back (fig. 9 + 10).
Step 9: Attach the protective padding (24) to the two lower vertical bars (8) and (9).
Close them at the back with the hook-and-loop fasteners. The basketball stand is
now fully assembled and ready for use (fig. 11).
Adjusting the height: Loosen the set screws (20) and (21) of the middle vertical bar
(9) and adjust the upper vertical tube (10) to the desired height. Then retighten the
set screws (20) and (21). The basket height can be adjusted anywhere between 157
cm and 205 cm. Make sure that the groove in the top tube (10) is oriented towards
the back. Also, make sure that the upper vertical bar (10) is sunk far enough into
the middle vertical bar (9) so that the marking line is no longer visible (fig. 12).
Warning: The height of the ring must not exceed 205 cm from the ground.
Warning: Never use the basketball stand without first completely filling the outer
sandbag (22) with sand.
TRANSPORTING THE STAND
Open the outer sandbag (22) and remove the filled inner sandbags (23). Loosen the
protective padding (24). You can now remove and transport the upper two vertical
poles (9) and (10), including the board (11) and basket ring (12). You can then easily
lift the base frame, including the lower vertical bar (8), and transport both parts
separately. Then follow the above procedure in reverse to completely reassemble the
basketball stand and make it ready for use.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be used
any more. If in any doubt, please contact our service team (http://www.hudora.de/).
Store the product in a safe place where it is protected from the elements, cannot be
damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point in your area. Local waste management companies will be able to answer your
questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information on
the product, replacement parts, solutions to problems and lost assembly manuals
at http://www.hudora.de/.
10/18