Approved Power Unit; Intended Use; Ec Declaration Of Conformity - Makita EN424MP Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Cutting width
Dimensions
(L x W x H)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.

Approved power unit

This attachment is approved to use only with the follow-
ing power unit(s):
• DUX60 Cordless multi function power head
• DUX18 Cordless multi function power head
• UX01G Cordless multi function power head
WARNING:
Never use the attachment with
non-approved power unit. Non-approved combi-
nation may cause serious injury.
Symbols
The followings show the symbols which may be used for the equip-
ment. Be sure that you understand their meaning before use.
Read and follow the instruction manual.
DANGER - Keep hands away from blade.
Wear protective helmet, eye and ear
protection.
Wear protective gloves.
Wear sturdy boots with non-slip soles.
Keep bystanders and animals at least 15 m
(50 ft) away from the power tool.
Hot surfaces - Burns to fingers or hands.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
820 mm x 350 mm x 191 mm

Intended use

This attachment is designed for only the purpose of
trimming grasses and weeds on the ground in conjunc-
tion with an approved power unit. Never use the attach-
ment for the other purpose. Abusing the attachment
may cause serious injury.

EC Declaration of Conformity

For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Ground Trimmer Attachment.
Designation of Type(s): EN424MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufactured in
accordance with the following Harmonised Standards:
EN 62841-1:2015, EN 62841-4-2:2019, EN IEC 62841-
4-5:2021, EN ISO 11806-1:2011.
Place and date of declaration: Kortenberg, Belgium.
31. 1 .2023
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
8 ENGLISH
EN424MP
330 mm
2.3 kg