Steba VK 300 Advanced Gebrauchsanweisung Seite 16

1) LED ON / Stand-by
4) LED Programme M 1
7) Minus-button
10) Sealing / Program selection
Settings
∙ Press the on / off button No.8. The display shows 2.5 (Advanced-Series shows 2. ),
the standard setting for the sealing time.
Sealing:
∙ Place the vacuum bag free of creases onto the sealing bar no. 11.
∙ Close the pressure bar and instantly press the "sealing" button no. 10. The LED
"Sealing" (No. 3) shines.
∙ It is possible that the pump might seem to start.
16
2) LED Vacuum ok
5) LED Programme M 2
8) Plus-button
3) LED sealing
6) LED Programme M 3
9) Stop / Ok
11) Display