How To Use - Steba VK 300 Advanced Gebrauchsanweisung

stove).
Always put the device on a surface that is level, stable, temperature-resistant and dry.
Keep it away from the edge of work surfaces so that it cannot fall off during use.
Before initial use:
∙ Wipe off the device with a damp towel.
∙ The sealing rings and the bag sealing bar must be clean and level, otherwise it will
not be possible to generate a vacuum.
Cleaning
∙ Unplug the device and leave to cool down.
Do not immerse the device in water or pour water
∙
over it.
∙ For hygienic reasons, the device must be cleaned after every
use.
∙ Remove the lower drip tray out of the vacuum chamber and
clean in warm soapy water and leave to dry.
∙ Wipe the other parts with a damp cloth with detergent and
dry. Do not use abrasive detergents.
Ensure that the upper welding strip and the upper seal are
∙
not damaged.
∙ Ensure that no liquids enter the vacuum extractor when clea-
ning.
Roll of film / bags
Use only the special rolls of film / plastic bags with 3D-structure that are suitable for
vacuuming and sealing. If the wrong film is used it will stick to the device and dama-
ge the sealing bar. The following special films are available from Steba, among other
things:
Please visit our homepage to get an overview about our current assortment of vacu-
um film rolls and bags.

How to use

14