Camera Reset; Lens Adjustment - Instar In-8401 2K+ Bedienungsanleitung

8. Camera Reset

In order to reset your camera, please follow the instructions below:
1. Keep pressing the reset button for 20
seconds
2. After the reset, the camera will restart,
which can take up to 60 seconds. All data
in the camera will be reset to factory de-
faults. Therefore, it is necessary to do all
settings in your camera again. For more
information on how to install your camera
again, please visit:
com. Once you connect the camera to the
network, use the INSTAR Camera Tool to
find out the camera's IP address and open
the camera's WebUI to start configurating
your camera again.

9. Lens Adjustment

The IN-8401 2K+ standard lens has a depth of field (also focus range) that is ad-
justed to a distance of approx. 5 - 8m. In case your area of interest is out of focus,
you will have to adjust the lens accordingly. Please turn the lens to the right or left
side until the camera image is shown clear.
Lens Tool
11-EN
https://install.instar.
Keep press-
ing for 20
seconds
Go to https://install.instar.com