Battery Led - Zodiac SpaBot Installations- Und Gebrauchsanleitung

Before starting - This manual (original instructions) contains essential installation
and startup instructions. Read all safety warnings before commencing installation.
Detachable supply unit (external adaptor) Use ONLY the detachable supply
unit provided with this appliance.
Not intended for use in swimming pools.
Anatomy
Charging
Port

Battery LED

Solid Green
Flashing
Orange
Flashing
Orange
Flashes
Orange
(when On/
Off pressed)
Flashing
Red
Specifications
Battery Charger 100-240V, 50/60Hz
Input: 0.6A Maximum
Charge
Maximum 40˚C
Temperature: Minimum 5˚C
Water
Maximum 40˚C
Temperature
Minimum 5˚C
Range:
Maximum 1.6 m
Operation Depth:
Minimum 25 cm
Filter
access
On/Off
Button
Charged.
Ready to run a full cycle.
Charging
Running. Battery low.
Very low battery level.
Charge needed. Cannot
run cleaner.
Charging error
Pivoting
Float
Water
Pivot
Sensor
arm
Wheels
Info LED
Flashing
Green
Solid Green
Flashing Red
Turning SpaBot On and Off
ON
To turn SpaBot ON, press down and
release the On/Off button once. The wheels
and brushes will move forward and back
once.The Battery LED will be solid green
and the Info LED will flash green. SpaBot is
now ready to be placed in the spa. SpaBot
will automatically turn off if not placed in the
water.
OFF
To turn SpaBot OFF, press down
and release the On/Off button once. The
Battery LED and the Info LED will turn
off. SpaBot will automatically turn off after
cleaning cycle is complete.
Lid
Canister
Active
Brushes
On. Not in water
Running. In water.
Error
EN
8