Zodiac SpaBot Installations- Und Gebrauchsanleitung Seite 10

1
Charging
• WARNING Only use the battery charger supplied with the cleaner. Do not use an
extension cord.
• Follow all charging instructions and do not charge SpaBot outside of the temperature
range specified in the instructions. Charging improperly or at temperatures outside of
the specified range may damage the battery and increase the risk of fire.
• Cleaner is shipped with a partial
charge for safety. Fully charge
the cleaner (6 hrs) before using
it for the first time.
1. When charging, place the cleaner
on a flat surface in a clean, dry,
well-ventilated area indoors,
preferably inside the home, a
garage, or shed with an ambiant
temperature between 5°C and
40°C.
When charging, cleaner must not be
exposed to direct sunlight, water,
heat ignition sources, pool and
chemicals and must be kept away
from children. Do not position in
direct contact with soil or humid
environments.
2. Connect the battery charger to
the back of the cleaner.
3. Plug in the power cord. The
Battery LED will be flashing
Orange to indicate power is on
and the cleaner is charging.
9
Charging (Flashing Orange)
4. When charging is complete,
Battery LED is solid Green,
indicating a full charge.
6h
8h
Unplug the cleaner when fully
charged to extend battery life.
Battery LED
Battery LED - Fully
Charged (Solid Green)