Zodiac SpaBot Installations- Und Gebrauchsanleitung Seite 11

2
Cleaning
To avoid risk of potentially serious injury, do not use the spa when the
cleaner is submerged or operating. Turn off spa pump and jets while
using cleaner
Cleaning Pattern
SpaBot autonomously navigates
around the floor, seats, and walls
of the spa (by diving and surfacing
randomly) to clean in only 60 minutes.
Start Cleaning
1. Press down the On/Off power
button. Wheels and brushes
quickly move forward and back
one time to confirm power is on.
2. Submerge the cleaner in the spa
(the cleaner will not begin until it
senses water).
.
3. Wait for the bubbles to stop and
release the cleaner to float to the
bottom. The cleaner will sense it
is in water and begin to move.
Remove from Spa
1. When the cleaning cycle ends,
the cleaner will float at the surface
and both LEDs will be OFF.
2. When in reach, grab the cleaner
handle and pull cleaner out of the
water.
EN
10