General Information; Operating Environment - Renkforce 2617740 Bedienungsanleitung

Operating instructions
Thermo-hygrometer with comfort level indicator
Item no. 2617740
1 Intended use
This product is designed to measure and display the room temperature and relative air
humidity. The maximum and minimum readings are saved and can be displayed separately.
The product indicates the current ambient conditions with comfort symbols. It can be wall-
mounted or placed on a level surface.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
Using the product for purposes other than those described above may damage the product.
Improper use can cause a short circuit, fire or other hazards.
This product complies with statutory, national and European regulations. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
2 Delivery content
Product
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric
shock.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we will assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the warranty/guarantee.

5.1 General information

This product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
5.2 Handling
Handle the product carefully. Impact, shocks or a fall even from a low height can damage
the product.

5.3 Operating environment

Do not expose the product to any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, vapours,
and solvents.
Protect the product from high humidity and moisture.
The product must not be exposed to direct sunlight.
Never switch the device on immediately after taking it from a cold into a warm environment.
This may cause condensation to form, which can destroy the product. Allow the product to
reach room temperature before using it.
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the device.
Operating instructions
www.conrad.com/downloads or scan the QR code
If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. DO NOT attempt to repair the product yourself. Safe operation can no
longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
5.5 (Rechargeable) batteries
Pay attention to correct polarity when inserting the batteries.
If you do not plan to use the product for an extended period, remove the batteries to prevent
damage from leaking. Leaking or damaged batteries may cause acid burns if they come
into contact with your skin. Always use suitable protective gloves when handling damaged
batteries.
Batteries must be kept out of reach of children. Do not leave batteries lying around, as there
is risk that children or pets may swallow them.
All batteries should be replaced at the same time. Mixing old and new batteries in the
device can lead to battery leakage and device damage.
Batteries must not be dismantled, short-circuited or thrown into open flames. Never attempt
to recharge non-rechargeable batteries. This may cause an explosion!
6 Controls and indicators
1
2
4
5
6
1 Temperature display
2 Humidity display
3 Comfort level indicator
4 Keyhole hanger
5 °C/°F toggle button
6 Battery compartment cover
7 MAX/MIN button
8 Stand
3
7
8