Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• This battery pack is equipped with a power bar which is used to give an indication of
the battery pack's remaining charge. Press the power bar button to check battery
capacity.
3. Functions
a. install the bit (Fig. 3).
Fig.3
b. Forward /reverse adjustment (Fig.4)
Fig.4
•
When selecting a drill bit, use the
right type for your job. For best
performance, always use sharp drill
bit.
•
To open the chuck jaws, hold its
collar while turning the sleeve in the
counterclockwise direction. Insert
the bit deeply into the chuck, and then
center the bit in the chuck jaws.
•
To close the chuck jaws, hold the
collar while turning the sleeve in the
clockwise direction. Tighten securely.
•
To remove the bit, reverse the
direction.
NOTE: The chucks of reversible drills are
always fixed by a screw with a left hand
thread. The screw must be loosed before
the chuck can be removed if necessary.
To loosen the screw, turn it in a clockwise
direction.
•
For forward (clockwise) rotation,
push the forward /reverse switch to
the left position.
•
For reverse (anticlockwise) rotation,
push the forward/reverse control to
the right position.
•
The tool is equipped with a forward/
reverse indicator. If the forward/
reverse control is selected and the
on/off trigger switch is pressed, the
corresponding forward/reverse
indicator will come on.
90 | 91
GB
Werbung
Inhaltsverzeichnis
