Cleaning The Filter - iRobot Roomba Combo i8+ Bedienungsanleitung

Cleaning the Filter

1
Remove the bin. Remove the filter by
grasping both ends and pulling out.
EN
2
Remove debris by tapping the filter against
your trash container.
3
Reinsert filter with ridged grips facing out.
Place bin back in the robot.
Important: The robot will not run if
the filter is not installed correctly.
Replace the filter every two months.
7 For more information, visit global.irobot.com
Cleaning the Full Bin Sensors
1
Remove and empty the bin.
2
Wipe the inner sensors with a clean, dry
cloth.
3
Wipe the bin door with a clean, dry cloth.
Closed Door
Open Door
Washing the Bin
Important: Do not wash the filter. Remove
the filter before washing the bin.
1
Release the bin, remove the filter, and open
the bin door.
2
Rinse the bin using warm water.
Note:
Bin is not dishwasher safe.
3
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.