iRobot Roomba Combo i8+ Bedienungsanleitung Seite 12

Cleaning the Multi-Surface
Brushes
1
Pinch the brush frame release tab, lift the tab,
and remove any obstructions.
EN
2
Remove the brushes from the robot. Remove
the brush caps from the ends of the brushes.
Remove any hair or debris that has collected
beneath the caps. Reinstall the brush caps.
3
Remove any hair or debris from the square
and hexagonal pegs on the opposite side of
the brushes.
9 For more information, visit global.irobot.com
4
Remove the bin from the robot and clear any
debris from the vacuum path.
5
Reinstall the brushes in the robot. Match
the shape of the brush pegs with the shape
of the brush icons in the cleaning head
module
Cleaning the Sensors, IR Window,
and Charging Contacts
1
Wipe sensors and charging contacts with
a clean dry cloth. You can alternately use
a pad of melamine foam to remove built
up debris on the robot and CleanBase
charging contacts.
2
Inspect the sensors and charging contacts
to make sure they are clear of debris.
Wipe with a clean, dry cloth.
Important: Do not spray cleaning solution
or water onto the sensors or sensor
openings.