Clean Air Optima CA-405 Bedienungsanleitung Seite 4

The control panel on the top side is equipped with buttons for the selection of the wanted setting.
In order to provide the most comfortable control, these settings can also be adjusted with the
included infrared remote control which can be stored in the corresponding box on the backside of
the device after use. The timer function makes it easy to program the moment when the fan is
supposed to stop working.
Instruction control
The fan is equipped with an electric zoom and emits the following sound signals: connecting
voltage 2x / turn on 1x, program choice 1x and turn off 1x.
OFF button:
For turning off the fan. By pushing this button the fan gets back to its starting position from any
setting.
ON/SPEED button:
a) ON/SPEED button: To turn on and regulate the speed 1, 2 or 3 of the fan. The LED light
corresponds to the chosen speed 1, 2 or 3, active ionizer and LED power.
ON/SPEED + MODE:
a) ON/SPEED button + MODE button: To regulate the speed of the fan 1, 2 or 3 + pulsing breeze.
The LED light corresponds to the chosen speed 1, 2 or 3, active ionizer + LED breeze and
power.
b) ON/SPEED + MODE button: To turn on the fan and regulate speed 1, 2 or 3 + pulsing breeze.
LED light corresponds to the chosen speed 1, 2 or 3, active ionizer + LED reminder and power.
SWING button: To turn on the oscillation function with a horizontal angle of 80° in combination
with the above mentioned settings, LED light with added LED Swing.
Timer button: The timer makes it possible to easily program the moment of turn off of the fan.
Timer settings for 1, 2, 4 or 8 hours. The LED light shows the chosen time.
4