Customer Service - Fuxtec FX-MS125 Original Bedienungsanleitung

Original Bedienungsanleitung FUXTEC FX-MS125_de_en_fr_ita_es_rev01
2. Difficulties during operation
Situation Cause
Choke is in "COLD START" position, the
The engine does exhaust system is blocked no air supply,
not reach the moving elements worn, ignition spark
speed weak too large valve clearance, cylinder
head sooty
Operating
Lines to carburetor blocked Spark plug
materials are
spacing incorrect
leaking
Motor- Wrong choke position,
Noises Camshaft damaged
Failure of the check valve on the tank cap
Carburetor
leaking
Carburetor gasket is worn out
If no troubleshooting solves the problem, please contact the FUXTEC
customer service. Only use original parts approved by the
manufacturer. Otherwise, there is a risk of danger.
 Customer Service
Have your purchased device repaired only by qualified personnel and only with original spare parts.
This will ensure that the safety of the device is maintained.
Please contact the manufacturer FUXTEC GmbH directly at
regarding maintenance work and the procurement of spare parts.
Open choke, replace exhaust system
Check or replace ignition coil, adjust
flywheel, spark plug
Replace lines and carburetor Adjust
gap dimension
Check/replace camshaft
Replace the fuel filler cap
Replace carburetor or gasket
www.fuxtec.co.uk
65
Solution
at any time