Front Wheel - Sushi Bikes MAKI+ BLACK Bedienungsanleitung

We start by inserting the front
wheel.
Simply lift the frame at the front so that
the fork floats freely and grab the loose
front wheel with your other hand. You
now guide this into the openings provi-
ded in the front fork.
There are washers on both sides, these
should be on the outside of the fork.
Place the small nose of the washer in the
recesses provided on the fork.
14
Now you can tighten the nuts using the
ring spanner/open-end wrench size 15.
Make sure you don't let them too loose,
but don't tighten them too much either.
If you have the possibility, set the
torque to approx. 25Nm. If you have
tightened the wheel, it may not run per-
fectly straight and you need to readjust:
To do this, lift the bike again at the front
and let the front wheel rotate once. If you
look at the tire from above, it should run
in a straight line. If this is not the case,
loosen a nut and push the front wheel in
one direction until it stops swinging.