Herunterladen Inhalt Inhalt Diese Seite drucken

How To Move/Store/Foldup Your Treadmill - Christopeit Sport RPT 6200 Montage- Und Bedienungsanleitung

Heimsport-trainingsgerät laufband
Vorschau ausblenden Andere Handbücher für RPT 6200:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

STEP4:
Checks and How to start
When everything is in order, connect the power supply cable (31) with
wall power (220-240V~50-60Hz) and switch on the main switch (32)
below the front frame.
Put the safety key (51) onto the computer (5) and the computer will
show normal manual mode. Put the safety clip (51) at your exercising
cloth and stand on the side rails (15).
Press Start-button and after a 3 sec. Count Down the treadmill start
moving. Start walking onto the walk surface (16) when speed is slow-
ly and follow the speed. Familiarize yourself with the machine at low
speed settings.
Run in the middle of the running surface (16) and hold yourself tight
at handgrips (6+7) if you feel insecure. Don't step on the side foot rails
(15). Only run with look at the Computer on the treadmill during the
running. In emergency case, step of the treadmill lateral and hold onto
the handgrips (6+7).
Note:
Please keep the instructions in a safe place as it may be required for re-
pairs or spare parts orders becoming necessary later.

HOW TO MOVE/STORE/FOLDUP YOUR TREADMILL:

Before folding up the treadmill switch off at main switch, plug out from wall power and wait until the running surface totally stopped.
Don't start the treadmill in fold up position!
STEP1:
Pull out the positioning pin (62) and turn the computer (5) backwards.
Put the left and right handles (6+7) in to vertical position.
STEP 2:
Unlock the left and right supports (3+4) by screw out the support
screws (30). Fold down the supports left and right side (3+4) with care
and lock up the horizontally position of supports (3+4) by screw in the
support screws (30). (Make sure that the gearing engages each other.)
STEP 3:
After folding, it is possible to store the flat product for example under
a table or bed. For upright storage, place the treadmill in the upright
position on the storage footpad (20). Hold the treadmill with one hand
tightly and unfold the support foot (8) with the other hand. This by pul-
ling the support foot (8) up and then bring it down until it clicks into
place.
Please make sure that you really hear the base frame lock into main
frame with "click" when you lift up the treadmill ,or it will fall down
and dangerous to user or pets etc.
Avoid upright storage or pay attention to sufficient fixation against drop
down.
STEP 4:
Fold out the treadmill in reverse order.
15
GB

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

2096

Inhaltsverzeichnis