Mounting Of Model F2303 - WIKA F2301 Betriebsanleitung

5. Commissioning, operation
5.5

Mounting of model F2303

Counter nut

Thread

Force transducer

1

Place the swivel head in the clamping
instrument, insert the retaining bolt into
the hole of the clamping instrument and
thus fix the measuring unit. The retaining
bolt must not restrict the free location of
the force transducer.
Guide values for "hand-tight" tightening torques M [Nm],
according to table 1 of DASt guideline 024:2018
Strength Tightening torques M [Nm]
class
M12
15
4,6 to 10,9
WIKA operating instructions, models F2301, F23C1, F23S1, F2303, F2304
Clamping system

Retaining bolt



Screw force transducer onto thread of
the measuring object. Do not screw in all
the way! If the measuring object must be
fixed, secure it with a nut. Observe the
recommended torque (see table below).
Load the force transducer.
M20 M24
60 110
2
M39 M45
390 495


M56 M64
640 760
17
EN