Inhaltsverzeichnis
Werbung
Setting your Individual Operating
Convenience on the DVD-Player
You can determine your personal basic settings
beforehand using certain playback functions. You
will find detailed explanations regarding these func-
tions in the appropriate chapter.
Proceed in this way for all settings!
1
Press the H/I button.
¢
2
Call up the OSD-screen menu using the
SETUP
button.
– The "Audio" line is set.
video DVD
Settings
Audio English
Subtitle English
Parental Control Not Active
TV Shape 16:9
Auto Play On
Auto FTS On
3
Select the function (line) you wish to be changed
using the //(cursor button(s).
4
Select the desired basic setting using the Y/Y or
X/X cursor buttons.
5
Finish settings using
¢
button or the
SETUP
¢
button.
RETURN
Audio – select synchronized language for
the sound (AUDIO LANGUAGE)
The sound is played in the language chosen by you,
providing it is available on the CD inserted.
If not, the language playback switches back to the
first synchronized language on the CD.
Select language for the subtitles
(SUBTITLE LANGUAGE)
The subtitles are shown in the language chosen by
you, providing they are available on the CD inser-
ted.
If not, the subtitle playback switches back to the
first language on the CD.
Switch child lock on and off
(PARENTAL CONTROL)
This is explained in more detail in the following sec-
tion "Child lock".
18
Select picture format (TV ASPECT RATIO )
Ex-works setting: Widescreen (16:9).
With a conventional TV set (4:3), you can select the
following settings:
"4:3 Letterbox" (letterbox format), for playback with
a black bar on the upper and lower edge of the TV
screen, or
"4:3 Pan Scan" (panorama format), for a widescre-
en
playback
enlarged
to
full
screen
height, in which the left and right edge of the screen
is cut.
Audiomatic playback (AUTO PLAY)
1
This function is switched on ex-works, which
means that playback automatically starts when a CD
2
is inserted.
You can switch this function off should you wish to
start playback manually.
3
Audiomatic playback of your music
programme (AUTO FTS)
This function is switched on ex-works, which
means that the playback of a FTS-programme auto-
matically starts when an Audio-CD, for which a
FTS-programme has been made, is inserted (see
page 17, chapter "Compile your own music pro-
gramme").
You can switch this function off should you wish to
control the FTS programme function manually.
Select digital output (DIGITAL OUTPUT)
4
With the factory setting "Off", a sound signal is not
sent via the digital output of the DVD-player. If you
use a digital multichannel A/V-receiver, then select,
using the information in the operating manual for
the receiver, either the setting "All" (MPEG, AC 3
5
and PCM) or "PCM" (normal stereo sound).
Video Shift – setting picture position
6
The picture is centred on the screen with the factory
setting.
!
Use this setting function to adjust the picture positi-
on to your personal taste by moving it to the left or
right.
Selecting OSDlanguage for user guide
(PLAYER OSD LANGUAGE)
The OSD-screen menus appear in the language
chosen by you.
The child Lock
Switching Off Child Lock
Repeat the entries in steps
CD playback can be blocked by implementing the
child lock.
The DVD-player is now released again.
The child lock can be activated in such a way that
every CD is blocked.
Releasing CDs
or
You can release (authorise) CDs for certain age
that for certain age groups, the CDs are authorised
groups.
by you for release.
1
Open CD compartment, insert desired CD and then
Switching on child lock
close the compartment again.
– The OSD-menu requests you to enter your perso-
Press the H/I button.
nal code.
¢
Call up the OSD-screen menu using the
SETUP
Enter 4-number code using the 1 ... 0 digit but-
2
button.
tons.
– The "Audio" line is set.
3
Press the H/ I button.
Select ( / / the line "Parental Control" with the
cursor buttons.
4
Activate the function "Parental Control" with the
X/X cursor button.
– The OSD-menu requests you to enter your
video DVD
Settings
personal code.
Audio English
Enter 4-number code using the 1 ... 0 digit but-
5
Subtitle English
tons.
Parental Control Not Active
TV Shape 16:9
The CD has now been released and can play without
Auto Play On
entering the code.
Auto FTS On
Re-blocking CDs
Repeat the entries in steps
Select the display "Enter Pin" using the Y/Y or
It is possible to release a total of 50 CDs. If too
X/X cursor buttons.
many are released, then the less frequently played
– The OSD-menu requests you to enter 4-number
CDs are automatically deleted.
code.
Enter 4-number code using the 1 ... 0 digit but-
tons.
– The "Confirm Pin" display appears.
Confirm the code number by entering the same
four-digit code number again.
The DVD-player is blocked.
Your personal code
Should you forget or misplace the code, then please
read more about this in the chapter "Rectifying mal-
functions" on page 20.
The 4-number code must be entered before each
CD playback using the digit buttons 1 ... 0,
unless you released (authorized) the CD in question
for certain age groups beforehand.
til
.
1
6
til
5
.
4
19
Werbung
Inhaltsverzeichnis
