Velleman CAMCOLD24W Bedienungsanleitung Seite 7

MANUAL Use manual mode only in environments with the exact
same amount of light throughout the day. We
recommend using the automatic mode even under such
conditions.
MODE = SHUT + AGC: you can set the shutter speed
and AGC as specified below:
 SHUTTER: set the shutter speed between 1/50 and
 AGC: set the AGC between 6 and 44.8 dB.
Note: If the scene becomes brighter or dimmer, the
camera will not adjust and the image may be over- or
underexposed.
7.3 White balance
Use this menu options to define the white balance adjustment.
Display: WHITE BAL
ATW ATW = auto-tracking white balance. White balance
makes sure that white objects are always reproduced
correctly. The ATW option controls the automatic white
balance adjustments. For most environments, the default
settings are sufficient.
 SPEED: controls how fast the camera will adjust the
 DELAY CNT: specifies how often the camera checks
 ATW FRAME: sets the frame magnification for the
 ENVIRONMENT: choose INDOOR for indoor
PUSH This is a fixed setting for white balance.
V. 02 – 30/05/2013
CAMCOLD24 - CAMCOLD24W
1/10000. The slower the shutter speed, the brighter
the image. Faster shutter speeds are used if you want
to capture fast moving objects with less motions blur.
white balance. At high settings this can result into
colour oscillation.
for colour changes and applies the ATW settings. The
lower the delay count, the more frequent the checks
and adjustments.
camera to identify the colour changes (the
recommended setting is 1.0.).
environments, and OUTDOOR for outdoor
environments.
7 ©Velleman nv