Velleman CAMCOLD24W Bedienungsanleitung Seite 10

Display: MOTION DET
OFF Motion detection is switched off.
ON Motion detection is switched on. Use the settings below.
DETECT SENSE: Set the motion detection sensitivity. With a
higher sensitivity, slighter movements will be detected.
BLOCK DISP: block display. Use this option to select squares
in a grid for motion detection.
1. Set BLOCK DISP to ENABLE and press the middle button.
The grid appears on the screen. Use the navigation buttons
on the joystick to select the squares and click the middle
button to enable/disable each of them for motion detection.
Motion is detected in the squares that show the grid.
Motion is not detected in squares that show the camera
image without grid. When you have finished, press and
hold the middle button for 3 seconds, then release.
2. Next, set BLOCK DISP to ON.
3. To disable block display, set BLOCK DISP to OFF.
MONITOR AREA: use this option to select a predefined
rectangular area for motion detection. You can define up to
4 areas.
1. First, set MONITOR AREA to ON.
2. Select which of the 4 areas you want to define in AREA
SEL (1/4 ... 4/4).
3. Use the TOP, BOTTOM, LEFT, and RIGHT settings to
define the top, bottom, left and right edge of the area.
7.8 Privacy
Use this function to block a part of the image where you don't want
to view activity. For example, if part of the image shows a public
area where recording may be illegal. You can define up to 8 areas.
Display: PRIVACY
OFF Privacy is switched off.
ON Privacy function is active. Use the settings below.
 Select which of the 8 areas you want to define in AREA SEL
(1/8 ... 8/8).
Use the TOP, BOTTOM, LEFT, and RIGHT settings to
define the top, bottom, left and right edge of the area.
 COLOR: sets the colour of the privacy area.
 TRANSP: sets the transparency for the privacy area.
V. 02 – 30/05/2013
CAMCOLD24 - CAMCOLD24W
10 ©Velleman nv