Velleman CAMCOLD24W Bedienungsanleitung Seite 6

 RETURN: select this option and press the middle button to return
to the previous level in the menu.
 EXIT: select this option and press the middle button to leave the
OSD menu without saving the settings.
 SAVE ALL: select this option and press the middle button to save
all settings.
 CAMERA RESET: select this option and press the middle button
to reset the camera to the factory defaults.
The OSD menu settings are described in detail below.
7.1 Lens
The LENS menu is not applicable to this camera. You can leave the
settings as they are (=MANUAL).
7.2 Shutter/AGC
Use this menu option to control how the camera responds to high
and low light settings using auto-gain and shutter settings. You can
choose between automatic or manual control by pressing the right
button of the joystick. Automatic control is usually sufficient for most
environments.
Display: SHUTTER/AGC
AUTO HIGH LUMINANCE: use this to adjust bright images.
SETUP  MODE = SHUT: the camera adjusts the image by
 BRIGHTNESS: Set the brightness level for high
Note: If you adjust this setting, we recommend that you
do it when there is a lot of light available.
LOW LUMINANCE: use this to adjust dim images using
automatic gain control.
 MODE: set to AGC to use automatic gain control. Set
 BRIGHTNESS: Set the brightness level for low
If you want to adjust this setting, we recommend that
you do it when it is very dark (night).
Note: AGC can introduce more noise in the image.
V. 02 – 30/05/2013
CAMCOLD24 - CAMCOLD24W
changing the shutter speed. You can configure high
and low luminance conditions.
luminance mode. Default setting is 24.
to OFF to switch automatic gain control off.
luminance mode.
6 ©Velleman nv