Cooking Table - Bauknecht BAR2 KH8V2 IN Kurzanleitung

Use or to set the cooking time you require, then press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: an audible signal will sound and the
display will indicate that cooking is complete.
Notes: To cancel the cooking time you have set, keep pressing
until the icon starts flashing on the display, then use
the cooking time to "00:00".
This cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/DELAYED
START
After a cooking time has been set, starting the function can
be delayed by programming its end time: press
icon and the current time start flashing on the display.
Use or to set the time you want cooking to end and
press to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: the function will remain paused
until it starts automatically after the period of time that has
been calculated in order for cooking to finish at the time you
have set.
Please note: To cancel the setting, switch the oven off by turning
the selection knob to position "
Please note: Delay to start functionality is not available for Grill
and Turbo Grill functions.

COOKING TABLE

RECIPE
Leavened cakes
Biscuits/tartlets
Pizza / Focaccia
to reset
until the
".
FUNCTION PREHEAT
END OF COOKING
An audible signal will sound and the display will indicate that
the function has finished.
Turn the selection knob to select a different function or to
position " " to switch the oven off.
Please note: If the timer is active, the display will show "END"
alternately with the remaining time.
5. SETTING THE TIMER
This option does not interrupt or program cooking but
allows you to use the display as a timer, either during while a
function is active or when the oven is off.
Keep pressing
on the display.
Use or to set the time you require and press
confirm.
An audible signal will sound once the timer has finished
counting down the selected time.
Notes: To cancel the timer, keep pressing
flashing, then use
6. DIAMOND CLEAN FUNCTION
To activate the "Diamond Clean" cleaning function, pour 200
ml of drinking water into the bottom of the oven, then turn the
selection knob and the thermostat knob to the
Please note: The position of the icon does not correspond to the
temperature reached during the cleaning cycle.
The function will activate automatically: the display shows
the time remaining to the end, alternating with "DC".
Please note: It is only possible to programme the end time of this
function. The duration is automatically set to 35 minutes.
TEMPERATURE
(°C)
Yes 170
Yes 160
Yes 160
Yes 160
Yes 160
Yes 150
Yes 190 - 250
Yes 190 - 250
until the icon and "00:00" start flashing
until the
to reset the time to "00:00".
DURATION
(MIN)
30 - 50
30 - 50
40 - 60
25 - 35
25 - 35
35 - 45
15 - 50
20 - 50
to
icon starts
icon.
LEVEL AND
ACCESSORIES
2
2
4 1
3
3
4 2
1/2
4 2