Inhaltsverzeichnis
Werbung
Digitaler Stellungsregler
Digital positioner
Positionneur digital
Commands
#
Display
1
Auto
Perform Auto Initialization
2
InCl
Perform Input Calibration
3
Stor
Save the actual configuration
4
Rest
Load saved configuration
5
DRes
Reset Diagnostic data
6
ReCl
Reset Factory Settings
7
End
Exit menu
21.1
Auto Initialization Procedure
a
Pay attention for actuators with variable acting speed.
In any case, the positioner must be initialized with the effective speed of the actuator with which it is to operate later.
If this is not observed, during operation the controller can switch to the "Target Position Error" state.
The Auto item move to the sub-menu that manages the Initialization procedure, the user can select between
two initialization modes:
Full Auto: (Go Auto)
The user has just to move the actuator (by D and I key switches) round to middle of the total stroke.
The procedure moves the actuator to the full open and close limits and operates a series of movements to evaluate
the characteristic of the actuator.
a
Pre- conditions required to start the Full Auto Initialization:
The actuator must be mounted and adjusted complete on the control valve. Limit switches open/ close must be
adjusted regarding the real stroke of the control valve.
+pls. note cut off modes (limit or torque switch)
a
During the initialization, the limits of the actuator/ valve will be reached
It must be ensured, that this can be carried out without any risks
06.12.2022
EBA REpos 8010_de _en_fr 2.0rev1.docx
Description
Enter to the Initialization procedure
Enter to the analogue input calibration procedure
Stores the actual user configuration
Loads the last stored (Stor) user configuration
Resets the diagnostic counters (Diag menu)
Resets the positioner to default factory settings
User configuration (Stor) will be deleted!!! INIT necessary!!
Back to the Command menu
Technical changes reserved / Modifications techniques sous réserve
Technische Änderungen vorbehalten /
REpos
-8010
Commands
Function
!!
.
Seite / page 52
Werbung
Inhaltsverzeichnis
