Digitaler Stellungsregler
Digital positioner
Positionneur digital
19.1
Operation
The REpos is operated by the three key switches.
The A/M Key serves to switch over the operating modes
and select the menu items.
The decrement key D serves to navigate through the parameter menu,
and to decrease the selected parameter value.
The increment key I serves to navigate through the parameter menu
and to increase the selected parameter value.
19.2
Automatic mode operation
Key function:
Key
A/M
D
I
19.3
Manual mode operation
Key function
Key
A/M
D
I
19.4
Menu navigation
Key function
Key
A/M
D
I
19.5
Editing parameter
Key function
Key
A/M
D
I
06.12.2022
EBA REpos 8010_de _en_fr 2.0rev1.docx
single press (1s)
switch to manual mode
long press (>4s)
switch to diagnostic/configuration/command mode
press
no effect
press
no effect
Action
single press (1s)
switch to automatic mode
long press (>4s)
switch to diagnostic/configuration/command mode
press
close output actuated
press
open output actuated
Action
press (1s)
menu item selection
long press (>4s)
exit menu
press
next menu item
press
previous menu item
Action
press (1s)
confirm the value and proceed to next item
long press (>4s)
exit the menu and discard value change
press
decrease value / go to next parameter
press
increase value / go to previous parameter
Technical changes reserved / Modifications techniques sous réserve
Technische Änderungen vorbehalten /
REpos
-8010
Description
Description
Description
Description
Seite / page 44