Inhaltsverzeichnis
Werbung
Digitaler Stellungsregler
Digital positioner
Positionneur digital
Feedback potentiometer installation and adjustment
16.1
Pre-conditions required for adjustment of the feedback potentiometer
The actuator must be mounted and adjusted on the control valve
Fasten the actuator to the valve body using
(2)
.
the pillars
Connect the valve plug / spindle with the
(1)
actuator spindle.
Set the limit switches to the real stroke of
the control valve. i.e., It must be certain that
the actuator switches off when the end
position has been reached.
pls note cut off modes!!
(limit or torque switch off)
Pictures are exemplary und apply for all actuators Type
06.12.2022
EBA REpos 8010_de _en_fr 2.0rev1.docx
1
2
(3)
3
REact
Technical changes reserved / Modifications techniques sous réserve
Technische Änderungen vorbehalten /
REpos
-8010
1
2
3
Seite / page 33
Werbung
Inhaltsverzeichnis
