Diagnostic Data - Circor REpos-Serie Einbau- Und Betriebsanleitung

Digitaler Stellungsregler
Digital positioner
Positionneur digital
20.2

Diagnostic data

# Display
1 TrTm Motor travel time
2 S0 Potentiometer value at 0%
3 S100 Potentiometer value at 100%
4 Hyst Dead band
5 WHrs Working hours
6 TStr Strokes
7 Str1 Strokes within 0...25%
8 Str2 Strokes within 25...50%
9 Str3 Strokes within 50...75%
10 Str4 Strokes within 75...100%
11 iErr Input error
12 SErr Potentiometer error
13 CErr Communication error
14 Temp Temperature
15 Tmin min. temperature
16 Tmax max. temperature
17 HrT1 Hours in temp. range T1
18 HrT2 Hours in temp. range T2
19 HrT3 Hours in temp. range T3
20 HrT4 Hours in temp. range T4
21 HrT5 Hours in temp. range T5
22 Wlif Instrument life hours
23 FW.VR Firmware version
24 End back to Main menu
06.12.2022 EBA REpos 8010_de _en_fr 2.0rev1.docx
Diagnostic data
Description
0....9999
0....100%
0....100%
0.5....5.0%
0....999k
0....999k
0....999k
0....999k
0....999k
0....999k
0....999k
0....999k
0....999k
-5°C....80°C
-5°C....80°C
-5°C....80°C
0....999k
0....999k
0....999k
0....999k
0....999k
0....999k
1.4.......
Technical changes reserved / Modifications techniques sous réserve
Technische Änderungen vorbehalten /
REpos
Range
Detected motor travel time during Init procedure
Potentiometer value at 0% stroke
Potentiometer value at 100% stroke
Detected dead band during Init procedure
Working hours total
Operating commands total
Operating commands within 0-25% of real stroke
Operating commands within 25-50% of real stroke
Operating commands within 50-75% of real stroke.
Operating commands within 75-100% of real stroke
Total count input signal out of range
Total error Potentiometer input
Total error communication
Current „on board „temperature
min. „on board „temperature
max." on board „temperature
Operating hours in range < 0°C
Operating hours in range 0°C....30°C
Operating hours in range 30°C....50°C
Operating hours in range 50°C....70°C
Operating hours in range > 70°C
Operating hours total non-resettable
actual Firmware version
back to Main menu
-8010
Function
Seite / page 47