Initial Setting; Basic Setting; Daylight Saving Time - Mitsubishi Electric Mr. SLIM PSA-M KA-Serie Bedienungshandbuch

8. Initial Setting

8.1. Basic setting

8.1.1 Clock
<Button operation>
Main Main menu
Initial setting
F1 F2 F3 F4
Initial setting menu
Basic setting
Display setting
Operation setting
Wi-Fi interface setting
Main menu:
Cursor
F1 F2 F3 F4
Basic setting
Main/Sub
Clock
Administrator password
Setting display:
Cursor
F1 F2 F3 F4
Clock menu
Clock

Daylight saving time

Setting display:
Cursor
F1 F2 F3 F4
Clock
yyyy/ mm/ dd hh: mm
/ 01 / 01 AM 12: 00
2021
Select:
Cursor
F1 F2 F3 F4
Navigating through the screens
• To go back to the Main menu ........... [MENU] button
• To return to the previous screen ....... [RETURN] button
Select "Initial setting" from the Main
menu, and press the [SELECT]
button.
Clock setting is required before
making the following settings.
• On/Off timer • Weekly timer
• OU silent mode • Energy saving
• Night setback
If a given system has no system
controllers, the clock time will
not automatically be corrected.
In this case, periodically correct
the clock time.
Move the cursor to "Basic setting"
with the [F1] or [F2] button, and
press the [SELECT] button.
Select "Clock" with the [F1] or [F2]
button, and press the [SELECT]
button.
Move the cursor to "Clock" with the
[F1] or [F2] button, and press the
[SELECT] button.
Move the cursor to the desired item
with the [F1] or [F2] button out of
year, month, date, hour, or minute.
Increase or decrease the value for
the selected item with the [F3] or
[F4] button, and press the [SELECT]
button.
A confirmation screen will appear.
8.1.2 Daylight saving time
Function description
The start/end time for daylight saving time can be set. The daylight
saving time function will be activated based on the setting contents.
• If a given system has a system controller, disable this setting to keep
the correct time.
• At the beginning and the end of daylight saving time, the timer may go
into action twice or not at all.
• This function will not work unless the clock has been set.
<Button operation>
Basic setting
Main/Sub
Clock
Administrator password
Setting display:
Cursor
F1 F2 F3 F4
Clock menu
Clock
Daylight saving time
15 00
Setting display:
Cursor
F1 F2 F3 F4
Select "Clock" from the Basic
setting menu, and press the
[SELECT] button.
Move the cursor to "Daylight saving
time" with the [F1] or [F2] button,
and press the [SELECT] button.
en
19