Disposal Of Your Refrigerator; Troubleshooting - Thermo Fisher Scientific ES Serie Bedienungsanleitung

Disposal of your refrigerator

When disposing your refrigerator do not take it to regular municipal waste containers. Instead, take it to an electrical/
electronic waste recycling and re-use center. This refrigerator contains insulation gases and refrigerant and must be
disposed of in the appropriate manner. Please contact the manufacturer or local authority for advice on how best to
dispose of this product.
A relevant label has been placed on the refrigerators packaging (see below). The product has been manufactured of
recyclable materials. Ask your local environmental care authority for information concerning location of such facilities.

Troubleshooting

PROBLEM
The equipment does
not work
The temperature
inside the equipment
is not low enough (the
compressor operates
continuously)
Water collects at the
bottom of the
refrigerator.
The equipment makes
too much noise.
ES Series Refrigerator
REASON
A gap in the electric system circuit.
The compressor hardly ever
activates.
The door does not shut tight or is
opened too often.
The ambient temperature is above
that which has been outlined in the
product specification.
Air circulation at the sides and
back of the equipment is
hampered.
The equipment is placed such that
it is subject to constant sunlight, or
another heat source e.g. Radiator.
The contents touch the back wall
of the cabinet.
The drain opening is clogged
refrigerator only.
The equipment is not level.cd
The equipment is touching another
object.
SOLUTION
1. Make sure the plug inserted into socket
2. Make sure the socket is not faulty.
3. Make sure the power supply cord is not damaged.
1. Check to see if the ambient is below +10°C
1. Re-arrange the products so they don't hamper the door.
2. Shorten the time the door is open for.
1.Check the equipment is operating at an ambient temperature
that meets the product specification.
1. Move equipment further away from the wall and endure
adequate clearance on both sides.
1. Move the equipment to a different place away from heat
sources or direct sunlight.
1. Move the products so they are not in contact with the back
wall.
1. Take the cleaning plug and unclog the condensate opening.
1. Place the equipment on an even surface or use adjustable
feet.
1. Reposition the equipment so it is detached from any other
objects.
22