Warning Alarms - Thermo Fisher Scientific ES Serie Bedienungsanleitung

Warning Alarms

Note: When a unit is first plugged-in and powered on, the High Alarm will sound during the initial pull-down to
temperature set-point. Press the alarm mute button to silence the alarm during pull down.
This refrigerator has been designed to provide both an audible and visual alarm should any of the following situations
occur: -
•
Door is left open for a set period.
•
Internal air temperature goes outside the set parameters, either too high or too low.
•
Internal 'load' temperature goes outside the set parameters, either too high or too low.
•
Should one of these alarms occur this can be muted by pressing
The 'load' temperature is a simulated temperature which is intended to provide an indication of the temperature of
the refrigerator's contents (e.g. a 5ml sample). The temperature of a refrigerator's contents will change more slowly
(up or down) than the air temperature within that refrigerator should there be a fault, or the door is left open.
HI: High Temperature Reading
HIL: High Loaf Temperature Reading
LO: Low Air Temperature Reading
LOL: Low Load Temperature Reading
E1: Probe Failure/Disconnection Indication
ES Series Refrigerator
on the controller.
14