Thermo Fisher Scientific ES Serie Bedienungsanleitung Seite 24

Remove hinge pin from top RH side (Figure 18), and re-fit to LH side (Figure 19).
10.
11. Remove blanking cap and door bush and refit on opposite sides (Figure 20-21).
Refit door on LH side hinge (Figure 22) and screw in place.
12.
13. Break out the LH side of the foot plate with long nose pliers (Figure 23 - 24).
Fig 22. Refit door on LH hinge
Fig 25. Refit foot plate
Refit foot plate (Figure 25 and 26).
14.
15. Remove the caps from the screws holding the handle in position.
Remove the handle screws.
16.
17. Remove the caps on the opposite side of the door.
Screw the handle into position and add the caps to cover the screws (Figure 28 - 29)
18.
21
Fig 18. RH Side
Fig 20. Remove and refit blanking cap
Fig 23. Break out LH side
Fig 26. Foot plate fitted
Fig 28. Screw handle
Fig 19. LH Side
Fig 21. Remove and refit hinge bush
Fig 24. Breakout removed
Fig 29. Add caps
ES Series Lab Refrigerator