Bauknecht BT 1090 BA Bedienungsanleitung Seite 20

FUNCTIONS
1 3 14 3 14
4 4
15 15
16
2 5 2
MY MENU
These functions have pre-allocated power levels to make cooking easier,
obtaining excellent results as the temperature of the pan is controlled
continuously by sensors. When the target temperature for the function
has been reached, it is automatically maintained without needing to
change the power level.
The MY MENU functions operate correctly with pans with the same
ferromagnetic area on the base of the pan as the area of the cooking zone.
In addition, for high temperature functions (above 100ºC), pans must have
a flat, even base (preferably "sandwich" type) as shown in the figure below
To ensure the correct operation of these functions, it is important that
the pan and the cooking zone are not hot at the start of the process.
The Touch Control has special features that help the user to cook through
the MY MENU sensor (17). These functions are available depending on
the model.
To activate a special feature on a zone:
1. First it should be selected; and then, the decimal point (4) will be
active on the power indicator (3).
2. Now click on the MY MENU sensor
presses will go over all the MY MENU functions available in each
zone one by one. These functions will show the activation with the
corresponding leds (14) simmering, (15) melting, (16) keep warm.
If you want to cancel a special active function at any time, you should
touch the "slider" cursor sensor (2) of the related zone to select it. The
decimal point (4) of the power indicator (3) will light up. Then, touch
again the "slider" (2) cursor to set a new power level or to power off the
zone, or you can choose a different special function touching again on
the MY MENU sensor (17).
SIMMERING FUNCTION
This feature allows you to keep it simmering. After the food is boiled,
enable the plate by selecting it, and press the MY MENU sensor
until the led (14) located on the icon
activated, the symbol will appear on the power indicator (3).
You can override the function at any time by turning off the plate, by
changing the power level or by choosing a different special function.
MELTING FUNCTION
This function maintains a low temperature in the cooking zone.
Ideal for defrosting food or for slowly melting other food types such as
chocolate, butter, etc.
6 7 12 9 8
13
16
5 171011 18
(17). The sequentially successive
lights up. Once the function is
14 15
3 4
16
2 5
until the led (15) located on the icon
activated, the symbol
override the function at any time by turning off the plate, by changing
the power level or by choosing a different special function.
KEEP WARM FUNCTION
This function automatically sets an appropriate power level to keep the
cooked food hot. To activate it, select the plate, and press on the MY
MENU sensor
Once the function is activated, the symbol
indicator (3). You can override the function at any time by turning off
the plate, by changing the power level or by choosing a different special
function.
FLEXIDUO
Through this function, it is possible to enable two cooking zones to work
together, and to select a power level and to activate the timer function
for both zones.
To activate this function, press the sensor
decimal points (4) of the linked plates will light up and the value "0" will
be shown on their power indicators (3).
The clock timer indicator (12) will show three segments indicating the
activated zones. In case your model has several zones with "FlexiDuo",
you can select the desired option by pressing the sensor
assigning the power to the chosen zone. You will have a few seconds
to perform the next operation; otherwise, the function will be disabled
automatically.
After the "FlexiDuo" is selected, you can assign the power by touching
any of the "sliders" cursors (2) of one of the linked zones. The power level
and its variations are displayed simultaneously on the power indicators
(3) of both zones.
To disable this feature, you should select level '0' to one of the cooking
zones. Also, when the function is disabled, the levels of powers and
functions assigned to the related zones are cleared.
IMPORTANT: Place the pots in the center of the cooking zone so that
they cover at least one of the reference points (as shown below).
(17)
BOILING FUNCTION
This function enables the automatic boiling control, which is a great help
for cooking pasta, rice, eggs, boiling some food, etc. It is available only in
zones where the
3 14
4
15
16
2
lights up. Once the function is
will appear on the power indicator (3). You can
(17) until the led (16) located on the icon
symbol appears.
EN
3 19 14
4
15
16
5 2 5
lights up.
will appear on the power
(18). By doing so, the
(18) before