Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
350-20065
B. Using the IR remote control
For more information, consult the IR remote control manual (350-20067).
Key
On
Memo
On
Memo
Test
Off
Reset
Test
Reset
Off
10
30
100
400
10
30
100
400
Lux
Lux
Lux
Lux
Lux
Lux
Lux
Lux
On
On
Memo
Memo
1000
Learn actual lux
1000
Lux
Learn actual lux
Lux
Test
Off
Off
Test
Reset
Reset
1
5
15
Time 1
1
5
15
Min
Min
Min
Time 1
10
10
30
30
100
100
400
400
Min
Min
Min
Lux
Lux
Lux
Lux
Lux
Lux
Lux
Lux
Memo
30
60
Pulse
Time 2
30
60
Min
Time 2
Min
Pulse
1000
1000
Min
Min
Learn actual lux
Learn actual lux
Lux
Lux
Test
Reset
Memo
Sens.
Sens.
On
Memo
Sens.
Sens.
On
1
Off
5
5
1
15
15
On
Off
100
400
Min
Min
Min
Min
Min
Min
Lux
Lux
Test
Reset
US
US
Test
Off
Reset
US
US
On
Memo
+
-
30
60
30
+
60
-
Pulse
Pulse
Min
Min
Min
Min
30
100
400
PIR /
US
PIR
PIR +
10
30
100
400
Lux
PIR /
Lux
PIR
Lux
US
PIR +
Test
Off
Reset
Lux
Lux
Lux
Lux
US
only
only
US
Sens.
Sens.
Sens.
Sens.
US
only
US
only
5
15
On
On
Off
Off
Min
Min
Learn actual lux
1000
10
30
100
400
Learn actual lux
Lux
Lux
US
Lux
US
Lux
Lux
US
US
60
+
+
-
-
Pulse
Min
1
5
15
1
5
15
1000
Min
Min
Min
Time 1
Learn actual lux
Min
Min
PIR /
US
Min
PIR /
PIR
PIR
PIR +
PIR +
US
Lux
US
US
only
only
only
only
US
US
30
60
Pulse
30
60
1
5
Min
Time 2
Min
15
Pulse
Min
Min
Min
Min
Min
Sens.
Sens.
Sens.
30
60
Off
Pulse
On
Min
Off
Min
US
only
US
US
US
US
-
Sens.
+
-
On
Off
PIR
US
PIR +
PIR /
PIR
US
PIR +
US
US
only
US
only
US
only
US
only
+
-
Memo
PIR /
US
PIR
PIR +
US
only
only
US
Test
Reset
100
400
Lux
Lux
On
Memo
5
Off
15
Test
Reset
Min
Min
10
30
100
400
60
Pulse
Lux
Lux
Lux
Lux
Min
1000
Learn actual lux
Lux
1
5
15
Time 1
Min
Min
Min
US
30
60
Pulse
Time 2
Min
Min
only
US
Sens.
Sens.
On
Off
US
US
+
-
PIR /
PIR
PIR +
US
US
only
only
US
9
Setting the desired detection method. There are
four preset values:
- PIR/US
- PIR only
- US only
- PIR+US
Activating or deactivating the air flow sensitivity.
Function
- You switch on the lights for eight hours. Setting
confirmed by flashing LEDs.
- Press again to return to auto mode.
- You switch off the lights for eight hours. Setting
confirmed by flashing LEDs.
- Press again to return to auto mode.
Press this key to unlock the device: you can
change the settings.
Press this key to lock the device: the new settings
are saved and activated.
If you do not lock the device, it will automatically
be locked after two minutes. All changed settings
are saved.
You are erasing all IR remote control settings.
The presence detector will operate according to the
settings you entered using the potentiometers.
With this key, you switch on the lights for two
seconds whenever motion is detected by the device.
With these red keys, you set the desired light level:
- fixed settings for 10, 30, 100, 400 and 1000 lux.
- a user-defined lux value that will function within a
range from 10 to 1000 lux.
Press this key until the green and red LEDs on the
presence detector are flashing: the device is in
learning mode to load the user-defined lux value.
The learning time is ten seconds, after which the
LEDs light up and the device returns to auto mode.
If the set lux value is outside the range (10 –
1000 lux), the LEDs will flash rapidly for five
seconds after ten seconds. In this case, the
following values will be used:
- > 1000 lux: the device uses a lux value of 1000 lux.
- < 10 lux: the device uses a lux value of 10 lux.
Use this key to save and copy Time 1 and lux
values.
1. Press
on the presence detectors whose
On
Memo
settings should be learnt. The settings on the
devices must have been entered via the IR
Off
Test
Reset
remote control.
10
30
100
400
Lux
Lux
Lux
Lux
2. Press
for more than three seconds to save
On
Memo
the settings.
1000
Learn actual lux
Lux
Off
Test
Reset
After three seconds, the green LED will flash to
On
Memo
1
5
15
Time 1
confirm the setting.
Min
Min
Min
10
30
100
400
Lux
Lux
Lux
Lux
3. Press
.
Off
30
Test
60
Reset
Time 2
Pulse
Min
Min
1000
Learn actual lux
Lux
4. Press
on the device to which the settings
On
Memo
10
30
100
400
Sens.
Sens.
Lux
Lux
Lux
Lux
On
must be sent.
Off
1
5
15
Time 1
Min
Min
Min
Test
Off
Reset
1000
US
Learn actual lux
US
5. Press
.
Lux
On
Memo
+
-
30
60
On
On
Memo
Memo
Time 2
Pulse
The green LED will flash to confirm the setting.
Min
Min
10
30
100
400
Lux
Lux
Lux
Lux
PIR /
PIR
1
PIR +
5
US
15
Time 1
Min
Min
Min
Test
Off
US
Reset
only
US
only
Sens.
6. Press
.
Sens.
Test
Test
Off
Off
Reset
Reset
On
Off
1000
Learn actual lux
Lux
30
60
The Time 1 and lux values have been sent.
Time 2
Pulse
10
30
100
400
Min
Min
Lux
Lux
Lux
Lux
US
US
10
10
30
30
100
100
400
400
Lux
Lux
Lux
Lux
Lux
Lux
Lux
Lux
+
-
With these blue keys, you set the switch-off
1
5
15
Time 1
Sens.
Sens.
Min
Min
Min
1000
Learn actual lux
On
Off
delay.
Lux
PIR /
PIR
PIR +
US
1000
1000
Learn actual lux
Learn actual lux
US
only
Lux
US
Lux
only
30
60
Time 2
Pulse
US
US
Min
Min
5
1
+
15
-
Time 1
Min
Min
Min
1
5
Press
, followed by one of the six settings: 1,
1
5
15
15
Time 1
Time 1
Min
Min
Min
Min
Min
Min
Sens.
Sens.
PIR /
PIR
PIR +
US
On
Off
5, 15, 30 or 60 minutes or pulse (1 second on, 9
30
US
60
only
US
only
Time 2
Pulse
Min
Min
30
30
60
60
Time 2
Time 2
Pulse
Pulse
seconds off).
Min
Min
Min
Min
US
US
+
-
Sens.
Sens.
On
Off
Sens.
Sens.
Sens.
Sens.
PIR /
On
On
PIR
Off
Off
PIR +
US
US
only
US
only
US
US
+
-
US
US
US
US
+
+
-
-
PIR /
PIR
PIR +
US
US
only
US
only
PIR /
PIR /
PIR
PIR
PIR +
PIR +
US
US
US
US
only
only
US
US
only
only
10
30
100
400
Test
Reset
Off
30
60
Lux
Lux
Lux
Lux
Pulse
Time 2
Min
Min
10
30
100
400
1000
Learn actual lux
Sens.
Lux
Sens.
Lux
Lux
Lux
Lux
On
Off
1000
1
5
15
Learn actual lux
Time 1
US
US
Lux
Min
Min
Min
+
-
1
5
15
60
30
PIR /
US
Time 1
PIR
PIR +
Time 2
Pulse
Min
Min
Min
Min
Min
US
only
only
US
Sens.
30
60
Sens.
Time 2
Pulse
Min
Min
On
Off
US
Sens.
Sens.
US
+
-
On
Off
PIR /
US
PIR
US
PIR +
US
+
-
US
only
only
US
PIR /
PIR
US
3.3. Detection method
PIR +
US
only
US
only
The presence detector includes two LEDs:
• red LED: on when the PIR sensor detects motion.
• green LED: on when the ultrasonic sensor detects motion.
Detection method
Application
PIR/US
Detection of minor movements
in rooms with small obstacles
(furniture, partition walls) or
rooms that are divided into
several smaller areas, such as
only US
public toilets or offices where
partition walls are used.
only PIR
Detection in rooms with no
obstacles, rooms with plenty of
air flow, or when the detection
range is very specific, such
as in small office spaces with
air-conditioning units or small
conference rooms.
PIR+US
Detection of minor movements
in classrooms, open plan offices,
etc. This method also prevents
false triggering.
3.4. Detection range
The detection range of an ultrasonic sensor is oval in shape and covers 8 x 7 m for minor movements (e.g.
hands waving) and 16 x 10 m for major movements (e.g. walking). The detection angle is 360° for both PIR
and ultrasonic sensors. (fig. 6)
The direction of the ultrasonic sensor should aim to the main detection area to achieve the best detection
coverage.
The detection area can be increased by adding a presence detector Dual Tech 360° (secondary) (350-
20066). A maximum of ten secondary detectors can be connected to one master. The lighting is operated in
accordance with the settings. Both the master and the secondary detector have the same detection range.
When covering a large area using several presence detectors, it is recommended to take into account an
overlap of approximately 20% in the ultrasonic detection range (fig. 7).
If you would like to exclude motion detection in a portion of the detection area or if the detection area is too
large, cover the sensor lens using the cover cap supplied. This allows the maximum range to be reduced
from 8 m to 6 m or 3 m. The 360° detection angle can be reduced in steps of 30° (fig. 8).
4. OPERATION AND USE
4.1. Activating the system
After connecting to the mains voltage, the presence detector requires approximately 30 seconds warm-
up time (stabilisation). During the warm-up time, the lighting is switched on. After the warm-up time, the
device will operate according to the factory settings.
4.2. General operation
The integrated light sensor continuously measures the daylight level in the detection area (360°) and
compares this level to the preset lux value. Thanks to the light sensor, the light switches on automatically
only if the detector detects motion within the detection range and if the daylight level falls below the preset
lux value:
• The lighting remains switched on as long as motion is detected.
• After the last motion is detected, the lighting remains switched on for the duration of the
preset switch-off delay (1 to 30 minutes). As soon as the switch-off delay has elapsed, the lighting
switches off.
• The lighting switches off automatically as soon the preset daylight level has been reached.
4.3. External push button
The lighting can also be switched on and off via a push button. When you use the push button, the lighting
will be switched on irrespective of the preset lux value.
• If the lighting is switched on via the push button, it will remain on as long as the presence detector
detects motion and the switch-off delay time has not elapsed.
• If the lighting is switched off via the push button, it will remain off as long as the presence detector
detects motion and the switch-off delay time has not elapsed.
With these keys, you set the sensitivity of the
ultrasonic sensor:
- Each time you press the key, the sensitivity
increases or decreases by 10%. The green LED
will flash with each change.
- When the maximum or minimum sensitivity
has been reached, the LED will light up for two
seconds.
With these keys, you activate or deactivate the
air flow sensitivity.
With these keys, you select the desired detection
method (PIR/US, PIR, PIR+US, US).
Function
- The lighting is switched on
whenever the PIR sensor or
ultrasonic sensor detects
motion.
- The lighting is switched on
whenever the ultrasonic sensor
detects motion.
- The lighting is switched on
whenever the PIR sensor
detects motion.
- The lighting is switched on
when both the PIR sensor and
the ultrasonic sensor detect
motion.
- If only one of both sensors
detects motion, the lighting will
remain on.
PM350-20065R23065
Werbung
Inhaltsverzeichnis
