Peiying PY-DVR002 Bedienungsanleitung Seite 7

Owner's manual
◦ If the camera is connected to the cigarette lighter socket, after
turning off the engine, the dashcam will turn off after 5 seconds.
Navigating the menu
• Press the M button to go to setting menu or to cancel selection. The
settings menu consists of mode settings and general settings. To go to
the general settings, press the M button again.
• Press the power button to confirm options.
• Use the up and down buttons to navigate the menu.
• Press and hold the M button to switch between recording, taking
pictures, and browsing files modes.
Recording
• If the microSD card is inserted and correctly formatted, the recording
will start automatically after providing the power to the dashcam (from
cigarette lighter socket or from USB port).
• To start or stop the recording press the power button, while in
recording mode.
• Before starting the recording, press the up button to enable or disable
voice recording (the crossed out microphone icon will appear on the
screen).
• While recording, press the down button to turn on the LEDs on the
front of the device.
Taking pictures
• To take a picture, while in the photography mode, press the power
button.
• To change the photography mode settings, press the M button. To
change the dashcam settings, press the M button again.
Browsing files
• Use the up and down buttons to switch between files.
EN
• To play the video file press the power button.
• To delete a file, press the M button, and select Delete. To change the
dashcam settings, press the M button again.
Dashcam settings
• Format: erase all data currently on the microSD card.
• Language: change the displayed language.
12
Owner's manual
• LCD Brightness: set the time of automatic power off of the display (the
camera will keep on working).
• Auto Power Off: set the time of automatic power off after idle (does not
apply for recording).
• Reset: reset all settings to factory values. Reset procedure can also
be performed by pressing the Reset button (slide a thin object into the
slot, for example a paper clip).
• Frequency: change the frequency of the recordings.
• Date / time: changing date and time. After setting the year, press the
power button to go to next setting (after setting minutes, press the
power button to save the settings).
• USB: select camera mode after plugging it to a PC.
• Version: displays current version of software.
TROUBLESHOOTING
Problem
Cannot record or take pictures
Recording ending automatically
"File error" during playing the
video or picture
Blurry picture
Stripes on recording
The device froze
13
Possible solution
Check if the card is locked and if
it has sufficient space.
Use microSD card of class 10 or
higher
Error occurred during saving the
file, please format the memory
card.
Clean the lens of the dashcam
Change the frequency settings
Press the Reset button To do it,
use thin object, for example, a
paper clip
EN