EFOY ProFuelBox Bedienungsanleitung Seite 47

Commissioning
Illustration for orientation for the placement of the fuel cartridge connectors in the
double cable plugs for easy connection
If your EFOY ProFuelBox is equipped with a fuel sensor, please take the following steps
to prepare the fuel sensor for operation. If your EFOY ProFuelBox was ordered without a
fuel sensor, you can skip this chapter.

If a fuel sensor is included with your ProFuelBox, one of the cable plugs will have a
small additional opening.

Repeat the procedure with the EFOY Fuel Manager hoses previously: Feed the fuel
sensor cable through the single cable plug and connect it to the EFOY Fuel
Manager.

Make sure that the cable leads from the EFOY ProFuelBox into the EFOY ProCube
2060A-3 XF. Then the Fuel Sensor can be connected to the EFOY Fuel Manager in
the EFOY ProCube 2060A-3 XF.
Please also refer to the additionally enclosed operating instructions for the Fuel Sensor.
4
3
1
2
4 3
1
2
1
:
Cable Gland EFOY ProFuelBox (view from the
outside)
Cable Gland EFOY ProCube 2060A-3 XF
(view from the inside)
Page 47