Operating Remote Control - Napoleon Allure Vertical Serie Installations- Und Betriebshandbuch

operating instructions
EN
5.2

operating remote control

Power
Blue Flame
Orange Flame
Yellow Flame
Heater
Flame Speed
Top Light
20
W415-3031 / 04.30.21
Turns the appliance on/off.
Controls flame brightness.
Settings:
F0 - Flame off
F1 - Small flame
F2 - Medium flame
F3 - Bright flame
F4 - Brightest flame
Turns the heater and blower
on/off.
Settings:
H0 - Heater and blower off
bL - Blower on
H1 - Low heat
H2 - High heat
Controls the speed of the
flame. There are 5 flame speed
settings: 01 (slowest) 02, 03,
04, and 05 (fastest).
Controls top light settings.
Settings:
d0 - Ember bed light off
d8 - White
d7 - Blue
d6 - Green
d5 - Red
d4 - Yellow
d3 - Purple
d2 - Autocycle through white,
blue, green, red, yellow, and
purple. (NOTE: It will take
8.5 seconds to switch be-
tween colours.)
d1 - Lock to desired colour
Ember Bed Color
Ember Bed
Brightness
Timer
Temperature
Control
Controls ember bed light
settings.
Settings:
L0 - Ember bed light off
L1 - White
L2 - Blue
L3 - Green
L4 - Red
L5 - Yellow
L6 - Purple
L7 - Auto-cycle through white,
blue, green, red, yellow, and
purple. (NOTE: It will take
8.5 seconds to switch
between colours.)
L8 - Lock to desired color
Controls the brightness of the
ember bed light.
Settings:
b1 - Low
b2 - Medium
b3 - Bright
b4 - Brightest
There are 10 timer settings:
00, 30min., 1h, 2h, 3h, 4h,
5h, 6h, 7h, 8h.
There are 7 temperature
settings: 61ºF [16ºC], 64ºF
[18ºC], 70ºF [21ºC], 75ºF
[24ºC], 81ºF [27ºC], 85ºF
[29ºC], and OFF.