Installing The Appliance Into The Wall (Recessed) - Napoleon Allure Vertical Serie Installations- Und Betriebshandbuch

2.5

installing the appliance into the wall (recessed)

(NON-LOAD
BEARING)
2mm)
mum
Model No.
NEFVC32H-EU
NEFVC38H-EU
1. Remove the side covers secured to the back of the
appliance and discard.
2. Insert the appliance into the recess, and then mark
the top and bottom bracket locations. Remove the
appliance from the recess and set aside on a soft,
non-abrasive surface.
3. Remove the top and bottom brackets (Fig. 1).
4. Using the top and bottom bracket location markings
from Step 2, install the top and bottom brackets to
the wall using 4 wood screws (supplied).
5. Re-insert the appliance into the recess, and then
secure it to the top and bottom brackets (Fig. 1).
Measurements from body of appliance:
Sides, Back, Top
FINISHING MATERIAL
A
B
C
A
30 3/4" (78.1cm)
14 1/2" (36.8cm)
36 3/4" (93.3cm)
B C
3 1/2" (8.9cm) min.
Top Bracket
Top Bracket
installation
0"
Brackets
Side View (recessed into a wall)
Bottom Bracket
Bottom Bracket
Fig. 1
W415-3031 / 04.30.21
EN
13