Finishing; Dark Crystal Installation - Napoleon Allure Vertical Serie Installations- Und Betriebshandbuch

3.0 finishing

EN
WARNING
!
• Power supply service must be completed prior to finishing in order to avoid reconstruction.
• Heat vents and air openings cannot be covered under any circumstances.
3.1

dark crystal installation

note:
The door glass must be removed and the appliance must be secured in its final location before the dark crystals
are installed (see "door glass removal" section).
1. Carefully place the dark crystals into the bottom media tray
(Fig. 1).
2. Apply an even layer from side to side.
3. Randomly place the 3 large crystal embers on top of the small
crystal embers.
14
W415-3031 / 04.30.21
Fig. 1