Français - HIKMICRO HM-TD5567T-7/W Schnellstartanleitung

incorrect. Mettre au rebut les batteries usagées
conformément aux instructions.
The built-in battery cannot be dismantled. Please

contact the manufacture for repair if necessary.
For long-term storage of the battery, make sure

it is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
This equipment is not suitable for use in locations

where children are likely to be present.
Improper replacement of the battery with an

incorrect type may defeat a safeguard (for
example, in the case of some lithium battery
types).
DO NOT dispose of the battery into fire or a hot

oven, or mechanically crush or cut the battery,
which may result in an explosion.
DO NOT leave the battery in an extremely high

temperature surrounding environment, which
may result in an explosion or the leakage of
flammable liquid or gas.
DO NOT subject the battery to extremely low air

pressure, which may result in an explosion or the
leakage of flammable liquid or gas.
Dispose of used batteries according to the

instructions.
Installation
Never place the equipment in an unstable

location. The equipment may fall, causing serious
personal injury or death.
This equipment is for use only with

corresponding brackets. Use with other (carts,
stands, or carriers) may result in instability causing
injury.
System Security
You acknowledge that the nature of Internet

provides for inherent security risks, and our
company shall not take any responsibilities for
abnormal operation, privacy leakage or other
damages resulting from cyber attack, hacker
attack, however, our company will provide timely
technical support if required.
Please enforce the protection for the personal

information and the data security as the device
may be confronted with the network security
problems when it is connected to the Internet.
Please contact us when the device might exist
network security risks.
Please understand that you have the

responsibility to configure all the passwords and
other security settings about the device, and keep
your user name and password.
Maintenance
If the product does not work properly, please

contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
L'image du produit est donnée uniquement
à titre de référence et le produit réel peut
présenter un aspect différent.
maintenance.
A few device components (e.g., electrolytic

capacitor) require regular replacement. The
average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
Wipe the device gently with a clean cloth and a

small quantity of ethanol, if necessary.
If the equipment is used in a manner not

specified by the manufacturer, the protection
provided by the device may be impaired.
To reduce the risk of fire, replace only with the

same type and rating of fuse.
The serial port of the equipment is used for

debugging only.
Disconnect the power source during servicing.

Using Environment
Make sure the running environment meets the

requirement of the device. The operating
temperature shall be -40 °C to 70 °C (-40 °F to
158 °F), and the operating humidity shall be 95%
or less, no condensing.
DO NOT expose the device to high

electromagnetic radiation or dusty environments.
DO NOT aim the lens at the sun or any other

bright light.
The equipment shall not be exposed to dripping

or splashing and that no objects filled with liquids,
such as vases, shall be placed on the equipment.
No naked flame sources, such as lighted candles,

should be placed on the equipment.
Provide a surge suppressor at the inlet opening

of the equipment under special conditions such as
the mountain top, iron tower, and forest.
Burned fingers when handling the parts with

symbol . Wait one-half hour after switching off
before handling the parts.
Emergency
If smoke, odor, or noise arises from the device,

immediately turn off the power, unplug the power
cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road,
Xixing Subdistrict, Binjiang District, Hangzhou，
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd
COMPLIANCE NOTICE: The thermal series products
might be subject to export controls in various
countries or regions, including without limitation,
the United States, European Union, United
Kingdom and/or other member countries of the
Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local
government authorities for any necessary export
license requirements if you intend to transfer,
export, re-export the thermal series products
between different countries.
Description des câbles (page 2 – A)
1. Câble d'entrée audio : connectez la
borne AUDIO-IN à la borne de l'interface GND.
2. Câble de sortie audio : connectez la
7
Français