Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.2.2 Backlight Features
The Wristop Computer has an electroluminescent backlight. This is initiated by pressing and holding the [Mode] button
for 2 seconds. The backlight will remain on for 5 seconds. Pressing any button during this time will restart the 5 second
period, continuing the backlight feature.
1.3 BUTTON FUNCTIONS
Four buttons are used to operate the Wristop Computer: [Mode], [+] (ON/OFF), [-] (Fast Cumulative), and [Select].
1.3.1 The [Mode] Button
Is located on the top right of the Wristop Computer.
•
In the main mode level, pressing the [Mode] button allows the user to select or move from one main mode or function
to the next (TIME, ALTI, BARO, COMP, HRM).
•
In the sub mode level, pressing the [Mode] button returns the user to the main mode level.
•
In the setup process, pressing the [Mode] button accepts the changes or preferences. Pressing the button again will
return the user to the main mode level.
•
Pressing the button for 2 seconds activates the backlight feature.
1.3.2 The [+] Button
Is located on the bottom right of the Wristop Computer.
•
In the setup process, pressing the [+] button changes or scrolls the value upward.
•
In the timing and recording functions, this button acts as a start/stop (On/Off) button.
•
In the memory and logbook functions, this button advances through previous recorded screens.
1.3.3 The [-] Button
Is located on the bottom left of the Wristop Computer.
•
In the setup process, pressing the [-] button changes or scrolls the value downward.
•
Also known as the "Fast Cumulative" button, by pressing the [-] button in any of the main modes, except the compass
7
Werbung
Kapitel
Inhaltsverzeichnis
