Temperature Regulation; Oven; Child Safety Device - Klugmann KO1076TFX Bedienungsanleitung

Caution！
End of cooking time range: current time<end of cooking time<current time+24hours.
End of cooking time= current time+cooking time+waiting time .
The reservation is waiting in the stage the furnace light is not bright, the wait time ends to enter the
duration stage of the furnace light to light a minute (same normally).

Temperature regulation

When the oven working program is selected, before starting to run, if you want to change the
operating temperature and operating time, you can press the key
1.After selecting the cooking function, the default temperature value will be displayed. Press the time
and temperature key. The temperature display module flashes to indicate that the temperature can
be set. Press the plus and minus keys to set the temperature. After setting the new temperature,
directly start the confirmation or select the next function to confirm the current setting.
2.When the oven is working, if you want to change the working time or working temperature, you must
first press the button
temperature, time are all paused and maintained, button flashes, to remind the user that the user is
currently in the pause state). At this time, the time and temperature can be set according to the above
steps. After the setting is completed, you need to press the button
oven will work according to the newly set parameters .
Oven light
1.The oven light can be turned on/off by the oven light button in the boot state.
2.After selecting a function to start, the oven light will turn on, and the oven light will automatically turn
off after turning on for 1 minute.In the pause state, the oven light does not turn on (you can turn it on
by pressing the light button
oven light will start working together with the heating element, and it will go out after 1 min.

Child Safety Device

1.In the boot state, press
by a prompt sound; except for the power button and the stove lamp button, the rest of the buttons will
not be touched. Enabling/cancelling child lock does not affect the operation of existing functions.
2.Press and hold for 3 seconds to cancel the child lock function and restore the state before the
child lock. When the key is invalid in the child lock state, there will be a prompt sound and the key
will flash 1 times. The child lock cannot be cancelled when the machine is turned on and off. When the
child lock is turned on, it is still in the child lock state after it is turned off. In the standby state, it can
only be unlocked but not locked.
(after starting to run, click the button
, and it will go out 1 min after it is lit). After the pause state is ended, the
and hold for 3 seconds to enter the child lock function, accompanied
.
to pause, at this time, all functions,
to confirm the operation, and the