Security Information - Siemens SIMATIC S7-4100 Kompaktbetriebsanleitung

WARNING
Intended use
SIMATIC products are intended for automation of machine plants, process control and process engineering. For the
intended area of application of the respective product (e.g. ambient conditions, possible use in safety-critical systems), refer
to the associated Documentation (https://support.industry.siemens.com/cs/ww/en/view/109813162).
If third-party products and components are used, these have to be recommended or approved by Siemens.
Proper transport, proper storage, setup, assembly/disassembly, installation, commissioning, operation, maintenance and
decommissioning are required to ensure that the product and its accessories operate safely and without any problems.
Non-observance may result in death or serious physical injury.
Note the information in the relevant Documentation (https://support.industry.siemens.com/cs/ww/en/view/109813162).
Observe the ambient conditions for intended operation as described in the "Technical specifications" section of the system
and equipment manuals.
2

Security information

Siemens provides products and solutions with industrial security functions that support the secure operation of plants,
systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens' products and solutions constitute one
element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such
systems, machines and components should only be connected to an enterprise network or the internet if and to the extent
such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please visit
https://www.siemens.com/industrialsecurity.
Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly
recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use
of product versions that are no longer supported, and failure to apply the latest updates may increase customer's exposure to
cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under
https://www.siemens.com/cert.
14
Automation system S7-4100
A5E52270580-AA, 12/2022