Resetting The Circuit Breaker - Opex Omation 210 Envelopener-Serie Betriebsanleitung

4.2.3. Resetting the circuit breaker

1. If the machine has no display and is plugged in and turned on, check the
circuit breaker on the back of the machine.
The circuit breaker shown in Figure 4-15 has been tripped and is open.
If there is white showing,
the circuit breaker is open
Figure 4-15: Open circuit breaker
Operation 49
Omation® Series 210™ Envelopener® Operator Manual
OPEX Corporation