Inhaltsverzeichnis
Werbung
2. When you first connect the power cable, the Yellow Chip Bin Full Indicator
Light will flash (Figure 4-2).This is because the machine cannot determine if
the chip bin is full and needs to be emptied.
Open the Chip Bin and empty the chips (if any). Removal and replacement
of the chip bin (Figure 4-3) resets the indicator. An internal counter (not the
one on the display) will count up to 3500 envelopes before flashing again,
to inform you to empty the chip bin.
Operation
Omation® Series 210™ Envelopener® Operator Manual
Chip bin light flashes rapidly
Figure 4-2: Flashing chip bin light
Figure 4-3: Opening the Chip Bin tray
OPEX Corporation
37
Werbung
Inhaltsverzeichnis
