Changing Fm Stations; Using Radio Presets - auna Connect 120 MKII Bedienungsanleitung

EN
56
3. Press NAVIGATE dial to select DRC high/low/off and press OK button to
confirm the setting.

Changing FM stations

Seek tuning
1. Press the Home button and turn and press the NAVIGATE dial to select
'FM radio' from the Home screen.
2. Press the NAVIGATE dial to seek to the next FM radio station that has a
strong signal.
3. Turn the NAVIGATE dial to step up or down 0.05 MHz.
Auto Scan
1. Press the Home button and turn and press the NAVIGATE dial to select
'FM radio' from the Home screen.
2. Press the SCAN button to search the FM radio station that has a strong
signal.

USING RADIO PRESETS

You can store up to 20 DAB, 20 FM and 20 Internet radio stations for quick
access.
To quick-store a station to a preset button (1-4)
Tune to the DAB, FM or internet radio station you want to store. Press and
hold one of the numbered Preset buttons (1-4) on remote control for two
seconds until you see a message to confirm that the preset has been stored.
To store a station to the preset list (5-20)
1. Tune to the DAB, FM or Internet radio station you want to store.
2. Press and hold the 5+ button to view the numerical list of stored
presets, then turn and press the NAVIGATE dial to choose any Preset
number between 5 and 20. You can overwrite existing presets. Press the
OK button on main unit or remote control to store the preset.
To recall a preset when listening to digital radio, FM radio or internet
radio
1. To tune to Presets 1 to 4, press the corresponding numbered button on
the front panel or on the remote control (1 to 4).
2. To access presets 5 to 20 on the front panel press the 5+ button, turn the
NAVIGATE dial right or left to scroll through the list of presets, then press
the OK button to tune to the selected preset.