Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
t
hermostat
The temperature selection button is located on the back of your refrigerator.
Turn the thermostat knob clockwise to turn it on, then to the desired position:
The MIN setting is the highest available temperature/the least cold setting.
•
The MID setting corresponds to an average temperature, the recommended setting.
•
•
The MAX setting is the lowest available temperature, i.e. the coldest setting.
- For optimal food preservation set the thermostat to "MID" (see diagram above). This
setting is to preserve fresh food.
- If you want to cool fresh foods quickly or you are using the appliance for the first time, choose
the "MAX" setting, making sure that the temperature in the refrigeration zone does not drop
below 0°C. In this case, set the thermostat to MID again.
- The temperature inside the appliance depends on a number of factors, such as the room
temperature, the quantity of food stored, how often the door is opened, etc.
The OFF setting corresponds to the appliance's "off" position.
To shut down the refrigerator completely, unplug it from the power point.
Note: When the thermostat is set to "MAX" you may hear the compressor running at more
regular intervals.
c
omments
•
If the appliance is unplugged, switched off or in the event of a power failure, you
should wait 3 to 5 minutes before restarting it. Do not attempt to turn it on again
before this time has elapsed as the appliance will not start up again.
•
It is best to install the appliance in the coolest part of the room to reduce energy
consumption. When the temperature in the room is too high, the refrigerator
temperature cannot reach the desired value.
V.2.0
USE OF THE REFRIGERATOR COMPARTMENT
T E MP. R E G
MID
MAX
OFF
MIN
14
Werbung
Inhaltsverzeichnis
